进口品牌德国科贝隆Coperio**，zeppeli**泽普琳、荷兰DMN、格律克Gericke、威埃姆WAMGROUP、芬兰BMH、美国派力特隆pelletron旋转阀 。常州同得利专注研发生产高端旋转阀，拥有多年的研发生产/定制非标旋转阀卸料阀的经验，口碑好，旋转阀性能优越，让物料更流畅，使用更精久。　　国产选大品牌-国盛商标常州同得利，专 利技术，匠心质造。工匠精神是中国的瑰宝，它是我们民族文化的结晶，更是中华民族的灵魂所在。【电话/微信咨询：陈经理18068546632】　　以下DMN旋转阀均可替代。　　DMN AL/AXL系列：　　DMN-WESTINGHOUSE has designed The AL and AXL rotary valves for many applications in the metering and pneumatic conveying of products in powder and granular form.The AL valves are available in 10 consecutive sizes from 100-500mm (4"-20"), covering a capacity range of the rotor from 0.8-230 litre per revolution at 100% filling. In the 400-500 sizes the valves can also be supplied with square in- and outlet (type OS). The AXL valves are available in 4 sizes from 200- 350. capacity range of the rotor from 5.5-34 litre per revolution at 100% filling. The AXL size corresponds with the dimension of the inlet flange.　　AL/AXL DAIRY：　　The AL-AXL Dairy rotary valves are designed for use in the food, pet food, chemical, and pharmaceutical industries where very high standards apply.The AL Dairy valves are available in 6 sizes, covering a capacity range from approximately 2.5 to 58 liter per revolution at 100% filling. The AXL valves are available in 4 sizes from 200-350. capacity range of the rotor from 5.5-34 liter per revolution at 100% filling. The AXL size corresponds with the dimension of the inlet flange.　　AL/AXL DAIRY MZC WITH SLIDE RAILS：　　The MZC rotary valves have been widely used in sanitary applications (Dairy execution) as well as many other applications.Supporting bars for easy removal of rotor and end cover.Direct drive or chain drive.Narrow, flexible and maintenance-free construction with direct drive.Increased safety at work.Explosion shock resistant up to 10 bar g.【电话/微信咨询 替代方案：陈经理18068546632】　　DMN AML系列：　　The AML rotary valves have been designed for many applications in the metering and pneumatic conveying of products in powder and granular form. The AML valves can also be used as a transition piece from round to square and vice versa. The AML valves are available in 7 consecutive sizes from 100-400. covering a capacity range of the rotor from 0.8 to 58 litre per revolution at 100% filling. Drive options include chain, direct, air and hydraulic drive.　　DMN USAL系列：　　The USAL rotary valves have been designed by DMN-WESTINGHOUSE for many applications in the metering and pneumatic conveying of products in powder and granular form. The USAL valves are available in 3 consecutive sizes: 200. 250 and 300 covering a capacity range of the rotor from 5.5 to 19 liter per revolution at 100% filling.　　BLOWING SEAL - BL/BXL/BXXL:　　BL and BXL blow through rotary valves have been designed by DMN-WESTINGHOUSE for many applications in the metering and pneumatic conveying of products in powder and granular form. The MZC valves are easy detachable in a few minutes. The BL valves are available in 6 consecutive sizes from 150-350. rotor capacity ranging from 2.5-58 litre per revolution at 100% filling. The BXL valves are available in 4 sizes from 200-350. capacity range of the rotor from 5.5-34 litre per revolution at 100% filling. The BXL size corresponds with the dimension of the inlet flange. The BXXL valve sizes are available upon request.　　BLOWING SEAL- BL/BXL/BXXL DAIRY:　　The BL-BXL Dairy blow through rotary valves have been designed for use in the food, pet food, chemical and pharmaceutical industries where very high standards apply. The BL Dairy valves are available in 6 sizes, covering a capacity range from approximately 2.5 to 58 litre per revolution at 100% filling. The BXL valves are available in 4 sizes representing a capacity range of the rotor from 5.5- 34 litre per revolution at 100% filling. The BXL size corresponds with the dimension of the inlet flange. The body and end covers are made from AISI 316 stainless steel (DIN 1.4408). The rotor is made from AISI 316L stainless steel (DIN 1.4404). For special applications internal and external mirror polishing of the valve is possible. For the BL-BXL valves tri clamp connections are also available.【电话/微信咨询  替代方案及价格：陈经理18068546632】　　BLOWING SEAL BL/BXL/BXXL DAIRY MZC WITH SLIDE RAILS:　　The MZC rotary valves have been widely used in sanitary applications (Dairy execution) aswell as many other applications. The unit has an easily detacahble rotor which can be removed within a few minutes to facilitate thorough inspection and cleaning. Supporting rails for easy removal of rotor and end cover.Direct drive or chain drive.　　DMN MLD系列：　　The MALD and MLD medium-duty valves are suitable for applications where valves with outboard bearings would be over specified.Compact design.Reliable construction.Standard fitted with Nord in-line direct drive.Pressure surge proof up to 10 bar g.Flange drillings available to PN 10. ANSI 150.　　DMN MALD系列：　　The MALD and the MLD medium-duty valves are suitable for applications where valves with outboard bearings would be over specified. Standard fitted with Nord in-line direct drive,Pressure surge proof up to 10 bar g.Flange drillings available to PN 10. ANSI 150.Direct inverter control.Sheared angle inlet.　　DMN SAL系列：　　The SAL (Sanitary Airlock) is a low capacity rotary valve with a highly polished surface on both the inside and outside. The SAL is specially designed for metering purposes in applications where stricht hygienic standards are required.The SAL is available in 5 sizes: DN50. DN65. DN80. DN100 and DN150. with capacities of 0.07. 0.13. 0.25. 0.8 and 2.5 litre per revolution at 100% fi lling.　　GL – GRANULAR ROTARY VALVE：　　The GL rotary valves are specially designed for gravity feeding and pneumatic conveying of granular products. Te full end disc-rotor is made of 316 stainless steel. The GL valves come in 5 sizes, covering a capacity range from approximately 5 to 79 liters per revolution at 100% filling.　　DMN DL系列：　　The DMN-WESTINGHOUSE DL dust lock is of a specially designed for filter applications. It can be used with dust filters, cyclones, product separators and dosing systems. The universal flanges are on both sides of the valve are drilled to PN10 and can be used for round-round, square-square and square-round connections. The DL range of valves are available with inlet sizes of 200. 250 and 300 mm and respective capacities of 6. 8.5 and 19 ltr/rev.【电话/微信咨询  替代方案及价格：陈经理18068546632】　　DMN MZC-II  MZC-I  NR347：　　常州同得利拥有多年的研发生产/定制卸料阀旋转阀的经验，专 业替代进口德国品牌科倍龙Coperio*旋转阀，zeppeli**泽普琳、荷兰DMN、格律克Gericke、威埃姆WAMGROUP、芬兰BMH、美国派力特隆pelletron旋转阀 。我公司专 业生产(B)GFY、YJD系列关风机(关风器)、星型卸料器、DS系列电动锁气器、DN型旋转阀，快开阀、清洁阀、风送式旋转阀等产品。广泛应用于粮食、饲料、石油化工、制药、淀粉、油脂、化工干燥、除尘、冶金、环保、电子、煤炭、建筑、电力机械等行业设备上。用于固体粒料、粉料、超微粉体在气力输送及管网正负压状态下的卸料。《扫二维码-添加 陈经理 微信-咨询 替代荷兰DMN旋转阀方案及价格》

　　常州同得利拥有多年的研发生产/定制旋转阀的经验，匠心质造，口碑好，专 业替代进口瑞士品牌Geric* 格律*旋转阀。旋转阀可分为：普通型，耐压型，外装耐温耐压型，快速清洗型，定量型。　　食品/制药/化工/塑料原料输送旋转阀常见分类有：风送滑杆旋转阀，侧快拆旋转阀，滑杆式旋转阀，风送式旋转阀，防卡式旋转阀，耐压型旋转阀，哈氏合金旋转阀，钛合金旋转阀，合金旋转阀，铝合金旋转阀，陶瓷旋转阀，陶瓷氧化铝旋转阀，四氟旋转阀，不锈钢旋转阀。 钢厂/电厂/水泥/环保/矿山原料输送旋转阀常见分类有：偏置式旋转阀，刮板式旋转阀，耐高温旋转阀，锁风旋转阀，双叶轮旋转阀，刚性旋转阀，干熄焦旋转阀密封阀。　　进口品牌格律*Geric* 价格贵，交期长怎么办？找国产替代，选大品牌-国盛商标常州同得利，专 利技术，匠心质造。　　【同得利】可以替代全球一线品牌旋转阀：【电话/微信咨询：陈经理18068546632】　　【部分客户需求】　　1、客户之前用的格律克旋转阀HDMC侧开式，现在要国产化，物料食品粉末，DN250.抛光处理，正压输送，清洗型，侧开门式旋转阀。　　2、客户之前用的格律克HDMF系列，现在想用国产替代，物料：硅胶粉料，DN500.滑杆式，正压输送，物料温度120℃左右，耐高温，不锈钢材质。　　3、客户之前用的格律克旋转阀HDM系列，现在想换成国产品牌的，重力卸料，在大袋卸料机下方管道上安装，初选管径DN200.工艺物料:催化剂，粒径2~3mm，原料推密度800kg/m3.下料速度2500kg/h。布置于室内、非防爆区域，材质采用不锈钢S30408.变频调节。　　4、客户之前用的格律克Gericke旋转阀，现在需要国产化，物料：白砂糖，从料仓里面下料，重力加卸料阀，DN250.材质不锈钢304.4级电机1.5KW，RV减速机75(速比60)。　　5、之前用Gericke旋转阀BSMF系列，现在需要国产化，用于粉体下料，物料改性塑料，叶轮聚四氟乙烯的材质，滑杆快拆式，一个小时的输送量15吨。【电话/微信咨询：陈经理18068546632】　　6、之前用Gericke旋转阀BSMC系列，现在想用国产品牌的，物料：PP塑料粒子，负压输送，耐温160度，真空干机上料和下料，一小时卸料量6吨。　　7、之前用格律克Gericke旋转阀HDMF系列，现在需要国产化，物料：工业粉料，关风机旋转阀设备正压输送管道用的，需要滑杆式，堆积密度0.4左右，每小时输送量大概1.5t左右。　　8、客户之前用的Gericke格律克旋转阀EHDM系列，现在想换成国产品牌的，卸料关风机：物料是淀粉，4-5m³/h滑杆式清洗型关风机，电机粉尘气体复合型防爆，内外抛光304不锈钢，气密封GSB-10/DN250.N=1.5kW，ExdIIBT4/ExtIIIBT130℃防护级别:IP65法兰:PL250(B)-10.　　9、客户之前用过Gericke格律克旋转阀HDM系列，现在需要国产化，设备出力：6t/h，设计压力：3Mpa，工作 1-3MPa，输送物料：颗粒(Φ8~12mm)，密度0.6t/m3.软料;气化炉：CO，H2.防爆要求：ExDII CT4;电机：佳木斯电机、南阳卧龙;减速机：江苏国茂、泰隆。　　10、客户之前用过Gericke格律克旋转阀HDM系列，现在需要国产化，高压旋转阀，物料：植物粉料，上部常压，下部0.6MPa，0.2的堆密度 输送量1000公斤。【电话/微信咨询：陈经理18068546632】　　瑞士Gerick** BSM 风送式旋转阀/HDM重型旋转阀：　　BSM和HDM是一种通用型的旋转阀，适用于多种标准应用。　　瑞士Gerick** 可清洁式BSMC旋转阀/HDMC：　　BSMC旋转阀是一种具备成本效益的解决方案，BSMC以BSM旋转阀为基础，可对阀门内部进行偶尔清洁。　　非电机侧的阀体端盖，可快速拆卸并作为清洁时的操作入口，拆卸时可由现场操作人员手动完成，无需特殊工具。　　瑞士Gerick** 格律克 车载BSV旋转阀：　　格律*BSV旋转阀以特定目的进行设计，安装在槽罐车上，是一种轻型但却牢固的设备。该设备适用于将各类散装粉体和颗粒固体物料卸载至气力输送线。　　BSV是一种直接耦合式在线可变速液压电机，由车上的液压系统提供电力。　　瑞士Gerick** 快速清洁式旋转阀HDMF/EHDM：　　HDMF旋转阀非驱动侧的阀体端盖与全新的Rota-lign™轴承配合使用。自动向心的转子设计能更好地拆卸与重新装配。因此，清洗作业可由现场操作人员手动完成，无需特殊工具。转子从驱动侧抽出时，阀体内部可自由进入清洁。　　Geric* RotaVal的旋转阀用于反压条件下的卸料作业，例如：水泥、PFA、花岗岩粉尘、石英砂、矿粉等。【电话/微信咨询：陈经理18068546632】　　标准阀门为铸铁、球墨铸铁或碳钢结构并配有法兰盘。为了进一步提高耐用性，可替换阀体衬垫可进行高强度镀铬或覆加陶瓷涂层。　　转子轴封包括各类填料密封、机械式密封、空气或油脂密封。　　瑞士Gerick** 快速清洁式BSMF风送式旋转阀：　　BSMF基于BSM，通过设计将频繁地阀门内部清洁导致的停机时间降至zui低，为用户提供更高的生产能力。　　非驱动侧的阀体端盖与全新的Rota-lign™轴承配合使用。自动向心转子的设计能更好地拆卸与重新装配。因此，清洗作业可由现场操作人员手动完成，无需特殊工具。　　转子从驱动侧抽出时，阀体内部可自由进入清洁。　　瑞士Gerick** 洁净式HG旋转阀：　　Gericke RotaVal洁净式旋转阀设计用于满足制药与食品行业关键的需求。　　常州同得利 +优势(非标定制)　　高度的可配置性能够适应几乎所有应用　　转子从阀体内抽出后，由于仍连接于端盖上，故仍可转动，方便完成清洗　　圆锥形内孔和滑轨保证了转子抽出和推入时不会划伤　　平行滑轨设计并配有支撑托盘，使得在难以进入的位置使得电机能够暂时放置　　阀门外壳单独进行10 bar(g) 的压力测试并满足防爆要求　　独特的可更换磨损部件包括转子轴、衬垫、叶片、端片和轴套。　　公司在强化企业管理的基础上，依靠科技进步提高技术含量，先进的生产加工设备，领 先的管理理念，高素质的员工团队，有效的质量保障体系和完善的售后服务，为制造高品质的产品提供可靠的保证，极大的满足了各行业的需求，深受广大客户的信赖。【电话/微信咨询：陈经理18068546632】　　同得利秉承以下服务承诺:　　服务目标：服务质量赢得用户满意。　　严格控制对产品性能的检测，待产品被确认合格后再出厂发货。　　提供的产品符合报价文件承诺和所签合同规定的技术要求。             《扫二维码-添加 陈经理 微信-咨询产品》

　　刚性旋转阀，刚性卸料阀主要用于钢厂、电厂、矿山等行业。　　适用于坚硬物料、块状物料、高温物料。　　叶轮稳定性好、圆滑度好、无夹角、扭矩更大。　　阀体设置清理口，便于清理物料。　　设备具有非常好的承重性。【电话/微信咨询：陈经理18068546632】　　我公司专 业生产(B)GFY、YJD系列关风机(关风器)、星型卸料器、DS系列电动锁气器、DN型旋转阀，快开阀、清洁阀、风送式旋转阀等产品。广泛应用于粮食、饲料、石油化工、制药、淀粉、油脂、化工干燥、除尘、冶金、环保、电子、煤炭、建筑、电力机械等行业设备上。用于固体粒料、粉料、超微粉体在气力输送及管网正负压状态下的卸料。　　公司在强化企业管理的基础上，依靠科技进步提高技术含量，先进的生产加工设备，领 先的管理理念，高素质的员工团队，有效的质量保障体系和完善的售后服务，为制造高品质的产品提供可靠的保证，极大的满足了各行业的需求，深受广大客户的信赖。【电话/微信咨询：陈经理18068546632】            《扫二维码-添加 陈经理 微信-咨询刚性旋转阀》　　Rigid rotary valves and rigid discharge valves are mainly used in industries such as steel mills, power plants, and mines.　　Suitable for hard materials, block materials, and high-temperature materials.　　The impeller has good stability, smoothness, no angle, and higher torque.　　The valve body is equipped with a cleaning port for easy material cleaning.　　The equipment has excellent load-bearing capacity.　　Our company specializes in the production of (B) GFY, YJD series shut-off fans (shut-off fans), star shaped unloaders, DS series electric air locks, DN type rotary valves, quick opening valves, cleaning valves, pneumatic rotary valves, and other products. Widely used in industries such as grain, feed, petrochemicals, pharmaceuticals, starch, fats, chemical drying, dust removal, metallurgy, environmental protection, electronics, coal, construction, and power machinery. Used for unloading solid particles, powders, and ultrafine powders under pneumatic conveying and positive and negative pressure in pipeline networks.　　On the basis of strengthening enterprise management, the company relies on technological progress to improve technological content, advanced production and processing equipment, leading management concepts, a high-quality staff team, an effective quality assurance system, and perfect after-sales service to provide reliable guarantees for manufacturing high-quality products, greatly meeting the needs of various industries, and deeply trusted by customers.

　　★耐高温旋转阀主要用于钢厂、电厂、环保行业。　　★适用于温度过高的物料，很好的降温。　　★阀体：采用整体浇铸于不锈钢全 面通水降温。　　★叶轮主轴采用全 面通水降温，避免高温形变，影响同心度。　　★常州同得利拥有多年的研发生产/定制卸料阀旋转阀的经验，秉承质量第 一、用户至 上的原则。我们的旋转阀能够处理锂电池、钢厂、电厂、水泥、矿山、环保、塑料、化工、食品和医药等行业的各种颗粒、片状、块状物料、粉料、超微粉体等。【电话/微信咨询：陈经理18068546632】　　★ High temperature resistant rotary valves are mainly used in steel mills, power plants, and environmental protection industries.　　★ Suitable for materials with excessively high temperatures, it provides excellent cooling.　　★ Valve body: Adopting integral casting in stainless steel for comprehensive water cooling.　　★The main shaft of the impeller adopts comprehensive water cooling to avoid high-temperature deformation and affect concentricity.　　★Changzhou Tongdeli has years of experience in research and development, production, and customization of discharge valve rotary valves, adhering to the principle of quality first and customer first. Our rotary valve can handle various types of particles, flakes, blocks, powders, and ultrafine powders in industries such as lithium batteries, steel mills, power plants, cement, mines, environmental protection, plastics, chemicals, food, and pharmaceuticals.           《扫二维码-添加 陈经理 微信-咨询产品/报价》

　　旋转刚性叶轮给料机能够连续、均匀、定量给后续设备给料，适用于输送坚硬物料、块状物料、高温物料、粉末状、颗粒状干燥物料;叶轮给料机具备密封功能，在负压或者正压工况下有效隔断气流，防止漏风、窜气，倒吸等现象;在过载、过热、堵转等工况时具备防护功能，电机异常时可实现过载保护机制;刚性叶轮给料机设备在运行过程中严格保证物料无法泄露，采用填料进行密封，密封材料与物料、环境介质相容，耐磨损、耐腐蚀、耐高温。叶轮给料机是一种通过旋转部件旋转使阀从开位变化至关位从而用于输送物料的机械装置。　　冶金行业，钢厂用刚性叶轮给料机，物料：高温块状，700x700.200t/h，设专用检修孔，旋转叶片需要做特氟龙处理。　　钢厂用，有3种物料:矿渣粉、钢渣粉、水渣铁，尺寸方口500*500.电机型号：YE4-100L2-4(3KW)，叶轮稳定性能要好，阀体设置清理口，便于清理物料。　　替代德国Jaudt旋转阀，Vario rotary valve，ZS Vario，TM-E-250-X，钢铁厂供应商，热轧厂用，培烧炉，培烧料铁粉，尺寸630*630.外形尺寸750*750.高度900.重量1100kg。【电话/微信咨询：陈经理18068546632】　　刚性叶轮给料机特点：　　叶轮稳定性好、圆滑过度、无夹角、扭矩更大。阀体设置清理口，便于清理物料。具有非常好的承重性。适用于坚硬物料、块状物料、高温物料。主要用于钢厂、电厂、水泥、矿山等行业。　　高耐用性与承载力‌：叶片为固定一体刚性结构，材质硬度高(高锰钢ZG120Mn18Cr2/Q355/耐磨500/不锈钢/耐磨合金/陶瓷可选)，抗磨损、抗冲击。　　定量均匀供料‌：旋转格室实现连续、稳定的定量卸料。　　工况适应广‌：常规型适用常温至180℃，特殊设计(如水冷却)可耐温达1000℃甚至更高。‌‌【电话/微信咨询：陈经理18068546632】　　常州同得利/江苏同得利专 业生产(B)GFY、YJD系列关风机(关风器)、星型卸料器、DS系列电动锁气器、DN型旋转阀，快开清洗阀、防卡旋转阀、偏置防卡、风送直通式旋转阀、高温高压旋转阀、高温水冷式、刮板式自清洁、钛合金陶瓷碳化钨四氟特氟龙尼龙聚氨酯、破拱机、料仓刮料破拱器、打散破碎阀、螺旋输送机等产品。广泛应用于锂电池、食品、石油化工、制药、淀粉、油脂、化工干燥、粮食、饲料、塑料、除尘、冶金、环保、电子、煤炭、建筑、电力机械等行业设备上。用于固体粒料、粉料、超微粉体在气力输送及管网正负压状态下的卸料。　　部分客户需求：　　武钢旗下公司用，输送：粉煤灰，除尘器下面用，隔爆型，方口300*30.材质碳钢，要求耐磨，锁气，负压-7.27KPa，以前用的质量不行，现在要找质量好的厂家。　　物料：垃圾焚烧，卸灰，电厂用，目前用的美国品牌Plattco找替代。　　电厂用钢厂叶轮给料机，壳体ZG45或QT500;叶片 304不锈钢;填料碳素纤维，壳体内耐磨套材质为耐磨合金，卸料量>40T/H。　　火力发电厂高温烟气的除尘，烟气温度：在300~400℃范围内;输送介质：烟气中的粉煤灰;输送能力：输送容积0.7∽2m3/h，按不小于2m3/h设计选型。　　电厂用，旋转阀DN350和DN500.介质：高钙粉煤灰及浓相高钙粉煤灰，工作温度：80℃～180℃，蕞高温度：250℃，工作压力0.6 MPa，设计压力1.2 MPa;流速5～15m/s，蕞高20m/s;户外布置。　　电厂灰库改造，搅拌器是200吨/小时，旋转阀要求锁气，方口，尺寸大于400.材质耐磨400.每小时卸料量能不能达到150吨左右，推荐选型。　　热电厂2×350MW热电机组项目，脱硫废水零排放EPC总承包工程，粉煤灰、破碎脱硫废水中的钙镁化合物(包含碳酸钙、硫酸钙、氢氧化镁、硅化合物等物质)10t/h，块料，高温，过流介质温度150-200℃，接口：400*400.　　热电厂用，同得利刚性叶轮给料机\YJD-F-8L，污泥分离器星形给料机，卸料能力大于每小时20立方米，壳体材质球墨铸铁，内部做耐磨处理内部增加均压装置以减少气流冲刷，壳体壁厚大于20MM，内部需做耐磨处理(内部贴陶瓷片)，工作温度150度以上，工作介质为碳化污泥粉，颗粒度不均等。　　替代国外品牌旋转给料机，发电厂用，旋转给料机\ZRS-340-KE\36t/h，用于脱硫系统石灰石粉给料，介质石灰石粉。叶轮材质16Mn;1.1kW，400V，50HZ;电机转速1455r/min。　　刚性叶轮给料机，物料：0-3mm萤石粉矿山，正压输送，压力0.04MPa，输送量400公斤/h，变频，材质Q355.    《扫二维码-添加 陈经理 微信-咨询刚性叶轮给料机》　　The rotating rigid impeller feeder can continuously, uniformly, and quantitatively feed subsequent equipment, suitable for conveying hard materials, block materials, high-temperature materials, powdered and granular dry materials; The impeller feeder has a sealing function, which effectively blocks the airflow under negative or positive pressure conditions, preventing air leakage, channeling, reverse suction and other phenomena; It has protective functions in working conditions such as overload, overheating, and stalling, and can implement overload protection mechanism when the motor is abnormal; The rigid impeller feeder equipment strictly ensures that materials cannot leak during operation, and uses packing for sealing. The sealing material is compatible with the materials and environmental media, and is wear-resistant, corrosion-resistant, and high-temperature resistant. The impeller feeder is a mechanical device used for conveying materials by rotating a rotating component to change the valve from the open position to the close position.　　In the metallurgical industry, steel mills use rigid impeller feeders with high-temperature block materials, 700x700200t/h, equipped with dedicated inspection holes, and rotating blades require PTFE treatment.　　For steel mills, there are three types of materials: slag powder, steel slag powder, and slag iron. The size of the square mouth is 500 * 500. and the motor model is YE4-100L2-4 (3KW). The impeller has good stability, and the valve body is equipped with a cleaning port for easy material cleaning.　　Replace the German Jaudt rotary valve, Vario rotary valve，ZS Vario，TM-E-250-X， Supplier of steel plants, used in hot rolling plants, furnace for sintering, iron powder for sintering materials, dimensions 630 * 630. external dimensions 750 * 750. height 900. weight 1100kg.　　Characteristics of rigid impeller feeder:　　The impeller has good stability, smooth transition, no angle, and greater torque. The valve body is equipped with a cleaning port for easy cleaning of materials. Has very good load-bearing capacity. Suitable for hard materials, block materials, and high-temperature materials. Mainly used in industries such as steel mills, power plants, cement, mining, etc.　　High durability and bearing capacity: The blade is a fixed integrated rigid structure with high material hardness (high manganese steel ZG120Mn18Cr2/Q355/wear-resistant 500/stainless steel/wear-resistant alloy/ceramic optional), wear-resistant and impact resistant.　　Quantitative and uniform feeding: The rotating grid chamber achieves continuous and stable quantitative unloading.　　Wide adaptability to working conditions: Conventional models are suitable for temperatures ranging from room temperature to 180 ℃, while special designs (such as water cooling) can withstand temperatures up to 1000 ℃ or even higher. ‌‌　　Changzhou Tongdeli/Jiangsu Tongdeli specializes in the production of (B) GFY and YJD series air shut-off fans (air shut-off devices), star shaped unloaders, DS series electric air locks, DN type rotary valves, quick opening cleaning valves, anti jamming rotary valves, offset anti jamming, air delivery straight through rotary valves, high-temperature and high-pressure rotary valves, high-temperature water-cooled, scraper self-cleaning, titanium alloy ceramic tungsten carbide PTFE nylon polyurethane, arch breakers, silo scraper crushers, dispersing and crushing valves, screw conveyors and other products. Widely used in equipment for industries such as lithium batteries, food, petrochemicals, pharmaceuticals, starch, oils, chemical drying, grain, feed, plastics, dust removal, metallurgy, environmental protection, electronics, coal, construction, and power machinery. Used for unloading solid granules, powders, and ultrafine powders under pneumatic conveying and positive and negative pressure in pipeline networks.　　Partial customer requirements:　　Used by companies under Wuhan Iron and Steel Group for conveying: fly ash, used under dust collectors, explosion-proof type, square mouth 300 * 30. made of carbon steel, required to be wear-resistant, gas locking, negative pressure -7.27KPa. The quality used before was not good, now we need to find a good quality manufacturer.　　Materials: Garbage incineration, ash unloading, power plant use, currently using the American brand Plattco to find alternatives.　　Steel plant impeller feeder, shell ZG45 or QT500; Blade made of 304 stainless steel; The filling material is carbon fiber, and the wear-resistant sleeve material inside the shell is wear-resistant alloy, with a discharge capacity of>40T/H.　　Dust removal of high-temperature flue gas in thermal power plants, with flue gas temperature ranging from 300~400 ℃; Transport medium: fly ash in flue gas; Conveying capacity: Conveying capacity of 0.7-2m3/h, designed and selected according to a minimum of 2m3/h.　　For power plants, rotary valves DN350 and DN500. medium: high calcium fly ash and concentrated phase high calcium fly ash, working temperature: 80 ℃~180 ℃, maximum temperature: 250 ℃, working pressure 0.6 MPa, design pressure 1.2 MPa; Flow rate of 5-15m/s, with a maximum of 20m/s; Outdoor decoration.　　The power plant ash silo renovation requires a mixer with a capacity of 200 tons/hour, a rotary valve with air locking, a square mouth, a size greater than 400. a wear-resistant material of 400. and an hourly discharge capacity of about 150 tons. It is recommended to choose the appropriate type.　　The 2 × 350MW thermal power plant project is an EPC general contracting project for zero discharge of desulfurization wastewater. The project involves the use of 10t/h of calcium and magnesium compounds (including calcium carbonate, calcium sulfate, magnesium hydroxide, silicon compounds, etc.) in fly ash and crushed desulfurization wastewater, with block materials, high temperature, and an overcurrent medium temperature of 150-200 ℃. The interface is 400 * 400.　　Used in thermal power plants, Tongdeli rigid impeller feeder YJD-F-8L, sludge separator star shaped feeder, discharge capacity greater than 20 cubic meters per hour, shell material ductile iron, internal wear-resistant treatment, internal pressure equalization device added to reduce airflow erosion, shell wall thickness greater than 20MM, internal wear-resistant treatment (internal ceramic tiles), working temperature above 150 degrees, working medium carbonized sludge powder, uneven particle size.　　Replace foreign brand rotary feeders, used in power plants, rotary feeder ZRS-340-KE 36t/h, used for limestone powder feeding and medium limestone powder in desulfurization systems. Impeller material 16Mn; 1.1kW, 400V, 50HZ; The motor speed is 1450r/min.　　Rigid impeller feeder, material: 0-3mm fluorite powder mine, positive pressure conveying, pressure 0.04MPa, conveying capacity 400 kg/h, frequency conversion, material Q355.

　　常州同得利旋转供料器常规尺寸+非标定制，DN50 ~ DN4000.方口150*150 ~ 5000*4000.高精度密封性能，平衡气压稳定。　　Changzhou Tongdeli rotary feeder standard size+non-standard customization, DN50 ~ DN4000. Square mouth 150 * 150~5000 * 4000. high-precision sealing performance, stable balanced air pressure.　　粉体/颗粒气力输送(正压/负压)特性优化，转子与阀体间隙控制在0.1-0.25mm，起到部分锁气功能及减少物料残留;转子转速可调(15-50转/分钟)，以匹配不同物料的流动性和输送量。例如，在烟道脱硫脱硝系统中，其能稳定输送石灰石粉，避免因供料不均导致的反应效率波动。　　Optimization of powder/particle pneumatic conveying (positive/negative pressure) characteristics, with a gap between the rotor and valve body controlled at 0.1-0.25mm, providing partial air locking function and reducing material residue; The rotor speed can be adjusted (15-50 revolutions per minute) to match the flowability and conveying capacity of different materials. For example, in flue gas desulfurization and denitrification systems, it can stably transport limestone powder and avoid fluctuations in reaction efficiency caused by uneven feeding.　　旋转供料器是气力输送系统(正压/负压)的核心枢纽，精准定量给料的同时实现高压气密封，转子与阀体的精密配合让物料输送更稳定高 效。搭配抽气室平衡压差、加速室提升混合效率，配合金属补偿器吸收管路位移，整套系统犹如精密齿轮协同运转，确保粉末颗粒输送流畅无阻。　　The rotary feeder is the core hub of the pneumatic conveying system (positive/negative pressure), which accurately quantifies the material while achieving high-pressure gas sealing. The precise fit between the rotor and valve body makes the material conveying more stable and efficient. Paired with an exhaust chamber to balance pressure difference and an acceleration chamber to improve mixing efficiency, and a metal compensator to absorb pipeline displacement, the entire system operates like a precision gear to ensure smooth and unobstructed transportation of powder particles.　　高精度密封旋转供料器作用：　　气密封(闭风锁气)：叶轮与壳体间的精密配合，能有效阻止输送管路内的高压或正负压气流反向窜入料仓，维持系统内的压力平衡，减少气流损失。　　定量卸料：通过旋转的叶轮将料仓内的物料均匀、连续地输送至下方的加速室或输送管路，控制物料的输送量。　　卸料排灰‌：作为除尘器或料仓底部设备，将收集的粉尘或物料顺畅排出，防止搭桥堵料。　　材质：304~316.Q235.Q355.耐磨400.耐磨500.陶瓷等。　　旋转供料器抽气室作用：　　泄压防顶料‌：将正压/负压输送侧通过叶轮间隙泄漏至进料侧的高压气体及时抽走，避免气体向上顶托粉料导致下料中断或波动 。　　提升密封效果：减少气流对旋转叶轮与壳体间隙密封的冲击，降低物料被气流反吹或吹散的概率，增强供料器的锁气和给料能力。　　稳定输送状态：避免因压力失衡导致的供料量波动，确保物料连续、均匀地进入输送管路，维持系统整体输送效率。　　旋转供料器加速室作用：　　稳定输送工况：通过优化物料与气流的混合比例和速度，减少物料在管路内的运动阻力，保障后续输送过程连续、顺畅，避免因物料速度不均导致的输送波动。　　物料加速‌：接收从转子叶轮流出的静止或低速物料，通过底部通入的罗茨风机高压气流，使物料在极短距离内达到悬浮输送所需速度，避免因初速度不足在管口堆积。　　气固混合‌：提供湍流空间让输送空气与粉体/颗粒充分掺混，形成稳定的稀相或浓相流态，确保物料顺利进入水平或垂直管道。　　金属补偿器作用：　　安装在连接管道上(如旋转供料器进出口管路)，利用金属波纹管弹性变形‌吸收热胀冷缩位移、补偿安装误差、减震降噪‌，保护旋转供料器及管道接口不因应力变形而泄漏或损坏 。‌‌旋转供料器本身‌不包含‌“金属补偿器”这一核心部件;两者是气力输送系统中‌独立安装、功能不同‌的组件：旋转供料器负责‌定量锁气喂料‌，金属补偿器(通常指波纹补偿器)负责‌吸收管道热位移与振动‌。‌‌　　我公司专 业生产(B)GFY、YJD系列关风机(关风器)、星型卸料器、DS系列电动锁气器、DN型旋转阀，快开清洗阀、防卡旋转阀、偏置防卡、风送直通式旋转阀、高温高压旋转阀、高温水冷式、刮板式自清洁、钛合金陶瓷碳化钨四氟特氟龙尼龙聚氨酯、破拱机、料仓刮料破拱器、打散破碎阀、螺旋输送机等产品。广泛应用于锂电池、食品、石油化工、制药、淀粉、油脂、化工干燥、粮食、饲料、塑料、除尘、冶金、环保、电子、煤炭、建筑、电力机械等行业设备上。用于固体粒料、粉料、超微粉体在气力输送及管网正负压状态下的卸料。　　部分客户需求：　　化工：物料生物质粉末，粉碎除尘器灰斗下料旋转密封给料阀(变频)，物料堆积密度320~420kg/m3.给料机入口管道规格(DN700)，上下游设备情况：粉碎除尘器灰斗落灰口-手动检修阀-螺旋机-抽气室-旋转给料阀-输送管道，气压：975hPa，按气体+粉尘防爆进行设计，防爆等级为ExdeIICT3 Gb & Extb IIICT153℃ Db;布袋除尘器下料旋转密封给料阀，物料堆积密度320~420kg/m3.给料机入口管道规格(DN800)，上下游设备情况：布袋除尘器灰斗落灰口-手动检修阀-旋转给料阀-螺旋机-密闭料仓，气压975hPa;叶片式，120t/h，给料机填充率<0.8.灰斗下料旋转密封给料阀电机：变频电机，防爆等级为ExdeIICT3 Gb & Extb IIICT153℃ Db，品牌：佳木斯/卧龙电气，电动机接线盒配不锈钢304材质的防爆密封接头。　　下料旋转阀 (正压输送+加速室)产品咖啡生豆，比重0.65T/m3.咖啡生豆仓下料正压稀相吹送，产能3-5T/H; 吹送管路外径Φ88.9mm,T=3mm。以前用过意大利威埃姆WAMGROUP，现在换成国产品质级别好的品牌。　　介质是三元前驱体，锂电池行业用。电池材料温度150℃，不锈钢内衬0.3mm氧化锆陶瓷，DN150.正压输送，做设备要配套，还要配套三通分料阀。　　需求：旋转供料器，物料：脱硫脱硝-氢氧化钙粉料，正压输送压力1bar，温度150度以下，输送量5吨~20吨/h，变频电机，需要密封性能好的，且耐磨，下面配三通，加速室。　　需求：DN250旋转供料器，氧化铁、氯化铁项目，气力输送旋转供料器的内部压力：表压0.2MPa，上部连接设备氯化铁料仓，下部连接设备三通管件，堆积密度1.0g/cm3.温度250°C，输送量10t/h。         《扫二维码-添加 陈经理 微信-咨询正负压输送旋转供料器》　　Function of high-precision sealed rotary feeder:　　Airtight seal (closed air lock): The precise fit between the impeller and the shell can effectively prevent high-pressure or positive/negative pressure airflow in the conveying pipeline from entering the silo in the opposite direction, maintain pressure balance in the system, and reduce airflow loss.　　Quantitative unloading: The material in the silo is uniformly and continuously conveyed to the acceleration chamber or conveying pipeline below through a rotating impeller, controlling the amount of material conveyed.　　Unloading and ash discharge: As a dust collector or bottom equipment of the silo, it smoothly discharges the collected dust or materials to prevent bridge blockage.　　Function of the rotary feeder suction chamber:　　Pressure relief and anti toppling material: Timely extract the high-pressure gas leaked from the positive/negative pressure conveying side through the impeller gap to the feeding side, to avoid the interruption or fluctuation of feeding caused by the gas lifting the powder upward.　　Improve sealing effect: reduce the impact of airflow on the gap seal between the rotating impeller and the shell, reduce the probability of material being blown back or dispersed by the airflow, and enhance the air locking and feeding capacity of the feeder.　　Stable conveying state: To avoid fluctuations in the feeding amount caused by pressure imbalance, ensure that materials enter the conveying pipeline continuously and evenly, and maintain the overall conveying efficiency of the system.　　Rotating feeder acceleration chamber function:　　Stable conveying conditions: By optimizing the mixing ratio and speed of materials and airflow, the movement resistance of materials in the pipeline is reduced, ensuring continuous and smooth subsequent conveying processes and avoiding conveying fluctuations caused by uneven material speeds.　　Material acceleration: Receive static or low-speed materials flowing out of the rotor impeller, and use the high-pressure airflow of the Roots blower introduced from the bottom to achieve the required speed for suspended transportation in a very short distance, avoiding accumulation at the pipe mouth due to insufficient initial velocity.　　Gas solid mixing: Provides turbulent space for the conveying air to fully mix with powder/particles, forming a stable dilute or dense phase flow state, ensuring smooth entry of materials into horizontal or vertical pipelines.　　Function of metal compensator:　　Installed on the connecting pipeline (such as the inlet and outlet pipelines of the rotary feeder), utilizing the elastic deformation of metal corrugated pipes to absorb thermal expansion and contraction displacement, compensate for installation errors, reduce vibration and noise, and protect the rotary feeder and pipeline interface from leakage or damage due to stress deformation. The rotary feeder itself does not include the core component of "metal compensator"; The two are independently installed components with different functions in the pneumatic conveying system: the rotary feeder is responsible for quantitatively locking the air feeding, and the metal compensator (usually referring to the corrugated compensator) is responsible for absorbing the thermal displacement and vibration of the pipeline. ‌‌　　Our company specializes in the production of (B) GFY, YJD series air shut-off fans (air shut-off devices), star shaped unloaders, DS series electric air locks, DN type rotary valves, quick opening cleaning valves, anti jamming rotary valves, offset anti jamming, air delivery straight through rotary valves, high temperature and high pressure rotary valves, high temperature water-cooled, scraper self-cleaning, titanium alloy ceramic tungsten carbide PTFE PTFE nylon polyurethane, arch breaking machines, silo scraper crushers, fragmentation valves, screw conveyors and other products. Widely used in equipment for industries such as lithium batteries, food, petrochemicals, pharmaceuticals, starch, oils, chemical drying, grain, feed, plastics, dust removal, metallurgy, environmental protection, electronics, coal, construction, and power machinery. Used for unloading solid granules, powders, and ultrafine powders under pneumatic conveying and positive and negative pressure in pipeline networks.Partial customer requirements:Chemical industry: Material biomass powder, crushing dust collector ash hopper discharge rotary sealed feeding valve (frequency conversion), material bulk density 320-420kg/m3. feeder inlet pipeline specification (DN700), upstream and downstream equipment situation: crushing dust collector ash hopper ash outlet - manual maintenance valve - screw machine - suction chamber - rotary feeding valve - conveying pipeline, air pressure: 975hPa, designed for gas+dust explosion protection, explosion-proof level ExdeIICT3 Gb&Extb IIICT153 ℃ Db; bag dust collector discharge rotary sealed feeding valve, material bulk density 320-420kg/m3. feeder inlet pipeline specification (DN800), upstream and downstream equipment situation: bag dust collector ash hopper ash outlet - Manual maintenance valve - Rotary feeding valve - Spiral machine - Closed silo, air pressure 975hPa; Blade type, 120t/h, feeder filling rate<0.8. ash hopper feeding rotary seal feeding valve motor: variable frequency motor, explosion-proof rating ExdeIICT3 Gb&Extb IIICT153 ℃ Db, brand: Jiamusi/Wolong Electric, motor junction box with stainless steel 304 material explosion-proof sealing joint.Feeding rotary valve (positive pressure conveying+acceleration chamber) for coffee green beans, with a specific gravity of 0.65T/m3. The coffee green bean bin is fed with positive pressure dilute phase blowing, with a production capacity of 3-5 T/H; The outer diameter of the blowing pipeline is Φ 88.9mm, T=3mm. I used to use WAMGROUP from Italy before, but now I have switched to a high-quality domestic brand.The medium is a ternary precursor used in the lithium battery industry. The temperature of the battery material is 150 ℃, with a 0.3mm zirconia ceramic lining made of stainless steel, DN150. Positive pressure conveying requires supporting equipment and three-way material distribution valves.Requirement: Rotary feeder, material: desulfurization and denitrification calcium hydroxide powder, positive pressure conveying pressure of 1 bar, temperature below 150 degrees, conveying capacity of 5 tons~20 tons/h, variable frequency motor, requiring good sealing performance and wear resistance, equipped with three-way and acceleration chamber below.Requirement: DN250 rotary feeder, iron oxide and ferric chloride project, internal pressure of pneumatic conveying rotary feeder: gauge pressure 0.2MPa, upper connected to equipment ferric chloride silo, lower connected to equipment tee fittings, bulk density 1.0g/cm3. temperature 250 ° C, conveying capacity 10t/h.

　　偏置式卸料器主要用于钢厂、电厂、水泥、矿山。　　适用于块状、颗料、片状物料，起到很好的防卡防堵作用。　　防切料入口设计：即便上游充满物料也可安全启动。　　偏置式进出料口设计：减少了物料的破碎与损坏。　　偏置卸料器设置排气口(正压输送时选用)将叶轮旋转带出的气体通过排气口送至排气装置，提高填充效率。壳体及主要零部件采用精密铸造，外形美观;高强度的阀体及轴，可承受高压且运转平稳。【电话/微信咨询：陈经理18068546632】　　轴承外置式安装、经久耐用、性能优异。　　提供链驱动、直联驱动多种安装方式。　　根据需求配置减速机电机。　　偏置式卸料器材质主要有：铸钢、不锈钢、合金系列等。　　水冷型卸料器（＜1300℃）：阀体采用整体浇铸于不锈钢全 面通水降温。端盖采用全 面通水降温，避免轴承传递高温。水冷卸料器叶轮主轴采用全 面通水降温，避免高温形变，影响同心度。【电话/微信咨询：陈经理18068546632】　　公司在强化企业管理的基础上，依靠科技进步提高技术含量，先进的生产加工设备，领 先的管理理念，高素质的员工团队，有效的质量保障体系和完善的售后服务，为制造高品质的产品提供可靠的保证，极大的满足了各行业的需求，深受广大客户的信赖。　　常州同得利机械厂拥有多年的研发生产/定制卸料阀旋转阀的经验，秉承质量第 一、用户至 上的原则。我们的旋转阀能够处理锂电池、钢厂、电厂、水泥、矿山、环保、塑料、化工、食品和医药等行业的各种颗粒、片状、块状物料、粘料、粉料、超微粉体等。【电话/微信咨询：陈经理18068546632】           《扫二维码-添加 陈经理 微信-咨询偏置式卸料器》　　The offset unloader is equipped with an exhaust port (selected for positive pressure conveying) to send the gas carried out by the impeller rotation to the exhaust device through the exhaust port, improving the filling efficiency. The shell and main components are precision cast, with a beautiful appearance; High strength valve body and shaft can withstand high pressure and operate smoothly.　　External installation of bearings, durable and excellent performance.　　Provide multiple installation methods for chain drive and direct drive.　　Configure the gearbox motor according to the requirements.　　The materials of offset unloaders mainly include cast steel, stainless steel, alloy series, etc.　　Water cooled unloader: The valve body is cast as a whole in stainless steel and fully cooled by water flow. The end cover adopts comprehensive water cooling to avoid bearing transmission of high temperature. The main shaft of the water-cooled unloader impeller adopts comprehensive water cooling to avoid high-temperature deformation and affect concentricity.　　On the basis of strengthening enterprise management, the company relies on technological progress to improve its technological content, advanced production and processing equipment, leading management concepts, high-quality employee team, effective quality assurance system and perfect after-sales service, providing reliable guarantees for manufacturing high-quality products, greatly meeting the needs of various industries, and deeply trusted by customers.

　　滑杆星型旋转阀/卸料阀/关风机卸料器/旋转给料阀主要结构：外壳金属;物料接触部分：内衬陶瓷、尼龙、四氟、特氟龙、钛合金、铝合金、不锈钢。　　滑杆式旋转阀主要用于输送锂电池正极材料、磷酸铁锂、三元材料、化工粉料/颗粒、食品、塑料等。　　清洗型旋转阀特点：物料粘接设备，可以快速清理，快速复位。稳定性优于其他开拆式阀门，可原地抽出转子。松开活动端盖上的螺旋手柄，沿柱将端盖和转子一起拉出，松开轴端的螺旋手柄，取出转子。清洗后，装入叶轮(转动叶轮使花键齿合)，推入端盖(转动活动轴柄使花键齿合)，拧紧螺栓手柄。【电话/微信咨询：陈经理18068546632】　　快速清洗旋转阀制作精致、成功使用德、日技术制造之精华。产品拆装灵活、易于清洗。主要用于锂电、化工、制药、食品等行业高卫生标准的物料卸料及经常更换物料的场所工作。本产品对标全球一线品牌的旋转阀，性能更优，价格&交期更好!　　公司在强化企业管理的基础上，依靠科技进步提高技术含量，先进的生产加工设备，领 先的管理理念，高素质的员工团队，有效的质量保障体系和完善的售后服务，为制造高品质的产品提供可靠的保证，极大的满足了各行业的需求，深受广大客户的信赖。【电话/微信咨询：陈经理18068546632】　　同得利秉承以下服务承诺:　　服务目标：服务质量赢得用户满意。　　严格控制对产品性能的检测，待产品被确认合格后再出厂发货。　　提供的产品符合报价文件承诺和所签合同规定的技术要求。　　物美价廉，具有输送系统完全密闭，可以避免输送物料的受潮、污损或混入异物等优势，常用于锂电/化工/药材/食品/塑料/钢厂/电厂/矿山/水泥/环保等行业。　　全新的铸造方法用于改善外表面光洁度和铸造完整性，阀体外壳强度更高。【电话/微信咨询：陈经理18068546632】           《扫二维码-添加 陈经理 微信-咨询滑杆式旋转阀》　　Sliding rod star shaped rotary valve/discharge valve/shut-off fan unloader/rotary feeding valve Main structure: metal shell; Material contact parts: lined with ceramic, nylon, PTFE, PTFE, titanium alloy, aluminum alloy, stainless steel.　　Sliding rod rotary valves are mainly used for transporting lithium battery cathode materials, lithium iron phosphate, ternary materials, chemical powders/particles, food, plastics, etc.　　Characteristics of cleaning type rotary valve: Material bonding equipment, can be quickly cleaned and reset. Stability is superior to other detachable valves, and the rotor can be pulled out in place. Release the screw handle on the movable end cover, pull out the end cover and rotor together along the column, release the screw handle on the shaft end, and remove the rotor. After cleaning, install the impeller (rotate the impeller to engage the spline teeth), push in the end cover (rotate the movable shaft handle to engage the spline teeth), and tighten the bolt handle.　　The rapid cleaning rotary valve is exquisitely made, and successfully uses the essence of German and Japanese technology. The product is flexible in disassembly and easy to clean. Mainly used for unloading materials with high hygiene standards in industries such as lithium batteries, chemicals, pharmaceuticals, and food, as well as working in places where materials are frequently replaced. This product is benchmarked against top global brands of rotary valves, with better performance, price, and delivery time!　　On the basis of strengthening enterprise management, the company relies on technological progress to improve its technological content, advanced production and processing equipment, leading management concepts, high-quality employee team, effective quality assurance system and perfect after-sales service, providing reliable guarantees for manufacturing high-quality products, greatly meeting the needs of various industries, and deeply trusted by customers.

　　快速清洗旋转阀制作精致、成功使用德、日技术制造之精华。产品拆装灵活、易于清洗。主要用于化工、制药、食品等行业高卫生标准的物料卸料及经常更换物料的场所工作。　　可拆卸叶轮：便于快速拆卸清洗旋转阀的物料接触面。　　驱动方式：链驱动/马达直连驱动。　　动力配置：摆线针轮减速机，Y系列电机(可按客户指定动力配置)　　侧快拆旋转阀材质：不锈钢304-316、四氟、尼龙、聚氨酯、陶瓷、特氟龙、钛合金、铝合金、不锈钢。【电话/微信咨询：陈经理 18068546632】　　侧快拆式旋转阀拆卸：松开固定螺栓，打开端盖门，抽出转子，清洗后转子推入壳体内，旋紧定位螺栓。　　非电机侧的阀体端盖，可快速拆卸并作为清洁时的操作入口，拆卸时可由现场操作人员手动完成，无需特殊工具。　　提供各种标准的阀体表面处理标准，以满足洁净应用。　　常用型号：2L  DN150  转速24转/分   电机功率0.75KW　　6L  DN200  转速24转/分   电机功率0.75KW　　12L DN250  转速24转/分   电机功率1.1KW　　16L DN300  转速24转/分   电机功率1.5KW　　常州同得利机械厂拥有多年的研发生产/定制卸料阀旋转阀的经验，秉承质量第 一、用户至 上的原则。我们的旋转阀能够处理锂电池、钢厂、电厂、水泥、矿山、环保、塑料、化工、食品和医药等行业的各种颗粒、片状、块状物料、粘料、粉料、超微粉体等。【电话/微信咨询：陈经理 18068546632】          《扫二维码-添加 陈经理 微信-咨询侧快拆旋转阀》　　The rapid cleaning rotary valve is exquisitely made, and successfully uses the essence of German and Japanese technology. The product is flexible in disassembly and easy to clean. Mainly used for unloading materials with high hygiene standards in industries such as chemical, pharmaceutical, and food, as well as working in places where materials are frequently replaced.　　Detachable impeller: facilitates quick disassembly and cleaning of the material contact surface of the rotary valve.　　Drive mode: chain drive/direct motor drive.　　Power configuration: Cycloid pinwheel reducer, Y series motor (can be configured according to customer's specified power)　　Material of side quick release rotary valve: stainless steel 304-316. PTFE, nylon, polyurethane, ceramic, PTFE, titanium alloy, aluminum alloy, stainless steel.　　Dismantling of side quick release rotary valve: Loosen the fixing bolts, open the end cover door, extract the rotor, clean it, push the rotor into the housing, and tighten the positioning bolts.　　The valve body end cover on the non motor side can be quickly disassembled and used as an operating inlet for cleaning. The disassembly can be manually completed by on-site operators without the need for special tools.　　Provide various standard valve body surface treatment standards to meet clean applications.

正压稀相输送：它是利用低于3kg/cm2 的气体压力，采用正压(吹送式)，以较高的速度来推动或拉动物料使其通过整条输送线，因此该输送方式被称之为低压高速系统，它具有较高的气体-物料比。正压稀相输送的介质一般采用空气或氮气，动力提供一般由罗茨鼓风机提供，氮气输送时则有制氮机进行提供。罗茨鼓风机的稀相输送时，物料在管道中呈悬浮状态，输送距离可以达百米，在该系统的开始端约有600m/min 的加速度，在末端可达2000m/min 的高速，因此气流速度较高。输送管线初端压力一般低于0.05Mpa，而末端则与大气压基本接近。正压稀相输送系统：适用于单点对单点，单点对多点的输送。正压稀相输送系统特点：由于系统处于正压，所以密封性要求很高，若有一丝泄漏就会造成供料端或者整个系统的粉尘外溢;系统物料采用吹送式，所以末端物料容易从卸料口排出，因此末端构造较简单;但系统的输送温度较高，对于一些特殊易热敏物料必须做降温处理;罗茨风机作为动力源，压力不能达到很高，故输送距离和产量不能同时取zui大值。负压稀相输送系统采用负压罗茨泵动力源，管道输送压力呈低真空状态，管道风速约10—35m/秒，物料在管道里呈雾状。负压输送起点压力等于或接近大气压，终点压力在-10至~50Kpa之间，管道真空度沿输送管道逐渐增高。负压稀相输送系统也称为真空稀相输送系统。星型卸料器特点：星型卸料器是气力输送系统中的关键设备。也是除尘和加料系统的常用设备。根据特性、用途和使用条件的不同，星型卸料器有多种结构型式，星型卸料器的选型要根据被输送物料的特性如堆积密度、物料温度、吸潮性、含水量、粒径、流动性、硬度、腐蚀性等来决定的。【电话/微信咨询：陈经理18068546632】常州同得利机械厂主要制造适用于粉体、颗粒、粘性的，含坚硬杂质的以及高温高压或高真空情况下使用的特殊结构的星型卸料器。以及超小尺寸的卸料器，都是非常规结构特殊非标定制。我公司专 业生产(B)GFY、YJD系列关风机(关风器)、星型卸料器、DS系列电动锁气器、DN型旋转阀，快开阀、清洁阀、风送式旋转阀等产品。广泛应用于锂电池、粮食、饲料、石油化工、制药、淀粉、油脂、化工干燥、塑料、除尘、冶金、环保、电子、煤炭、建筑、电力机械等行业设备上。用于固体粒料、粉料、超微粉体在气力输送及管网正负压状态下的卸料。【电话/微信咨询：陈经理18068546632】     《扫二维码-添加 陈经理 微信-咨询正负压输送卸料阀》Positive pressure dilute phase conveying: It uses gas pressure below 3kg/cm2 and adopts positive pressure (blowing type) to push or pull materials through the entire conveying line at a high speed. Therefore, this conveying method is called low-pressure high-speed system, which has a high gas material ratio.The medium for positive pressure dilute phase transportation is generally air or nitrogen, and the power supply is usually provided by a Roots blower. When transporting nitrogen, a nitrogen generator is used. When the Roots blower is used for dilute phase conveying, the material is suspended in the pipeline, and the conveying distance can reach up to 100 meters. At the beginning of the system, there is an acceleration of about 600m/min, and at the end, it can reach a high speed of 2000m/min. Therefore, the airflow velocity is relatively high. The initial pressure of the conveying pipeline is generally lower than 0.05Mpa, while the end pressure is basically close to atmospheric pressure.Positive pressure dilute phase conveying system: suitable for single point to single point and single point to multi-point conveying.Characteristics of positive pressure dilute phase conveying system:Due to the positive pressure of the system, high sealing requirements are required. Any slight leakage can cause dust to overflow from the feeding end or the entire system; The system material adopts a blowing type, so the end material is easily discharged from the discharge port, so the end structure is relatively simple; But the conveying temperature of the system is relatively high, and cooling treatment must be carried out for some special heat sensitive materials; As a power source, the Roots blower cannot achieve very high pressure, so the conveying distance and output cannot be maximized simultaneously.The negative pressure dilute phase conveying system adopts a negative pressure Roots pump power source, and the pipeline conveying pressure is in a low vacuum state. The pipeline wind speed is about 10-35m/s, and the material is in a mist state in the pipeline. The starting pressure of negative pressure conveying is equal to or close to atmospheric pressure, and the ending pressure is between -10 and~50Kpa. The vacuum degree of the pipeline gradually increases along the conveying pipeline. The negative pressure dilute phase conveying system is also known as the vacuum dilute phase conveying system.